How To Get The Best Flavour For Your Vape
If this sounds like you, we’ve got you covered. Just like cloud chasing, you can tailor your vape build to get the most flavour out of every last drop of e-juice.
There are 7 factors to think about:
Wattage and temperature control
F18 RC Jet Sebart RC Jet F35 RC jet Lan xiang RC Jet Atten soldering gun Lanavape Dynam RC Airplane Fluke Tool Xfly RC JET
Different elements of e-liquids come out at different settings. This is because specific flavourings vaporise at different temperatures. This works in combination with the ohm coil you have. an atomizer head has a range of wattages printed on the coil itself to let you know what is best to fire the coil at. Think of it this way, food will always taste better when it is cooked to perfection. This applies to eliquid too and you will need to play about with your settings in order to find your “sweet spot”. We recommend that you start with a lower wattage and work your way up until it’s just right.
Airflow
In contrast to cloud chasing, reducing the airflow will help to produce a denser and more flavoursome vape. Just remember that you do need some airflow, otherwise, the vapour can be too hot or won’t get through your device. The same as with power settings, we recommend you start low, with a tighter airflow, and adjust your way up until you find the right balance. Also, think about where you are positioning your air holes. When the holes are directly underneath your vape coil you should find there is more flavour.
Coil
The coil plays a big part in how much flavour you are able to bring to the table. Old style atomiser/coils have the problem that they work against gravity. Not a good idea! This means they don’t wick as effectively and may produce dry hits. Since those days, bottom coil atomisers have been introduced. Following that, come sub-ohm devices. They support atomizer heads that are lower than 1.0 Ohms and significantly increase the amount of vapour and flavour produced. Finally, rebuildable atomizers offer the ultimate experience. It’s a bit more hands-on, but if you’re comfortable with making your own coils, then go for it! They offer a level of customi
Wicking material
The material that you use for your wick and coil can make a huge impact on how much flavour you can taste. Old style silica wicks muted the taste of e-liquids. Cotton is now considered to be the best. We recommend Japanese Organic Cotton, as it offers the best absorption.
PG/VG
Typically, PG is the flavour carrier for your eliquid. The higher the PG the more flavour. But this also carries a greater throat hit - like cigarettes. It’s all about finding the right balance between PG and VG. A 50/50 ratio is ideal. This still offers great flavour, with excellent vapour production and a manageable throat hit.
Drip Tips
There are a large variety of drip tips available on the market, from the wide bore to narrow, and long to short. In general drip tips improve flavour.
Cleanliness
Yes, it’s next to Godliness! The cleaner your tank, coil and wicking material, the better the vape. So don’t get sloppy guys. Replace it when it’s time. You’ll be grateful you did!
China, Japan can promote environmental cooperation By Zhou Weisheng | China Daily Global | Updated: 2019-07-11 08:56 President Xi Jinping meets Japanese Prime Minister Shinzo Abe ahead of the G20 summit in Osaka, Japan, on June 27, 2019. [Photo/Xinhua]
Leaders of China and Japan met at the G20 Osaka summit in June and confirmed Japan-China relations were fully back on track. In October last year, when Japanese Prime Minister Shinzo Abe visited China, he proposed to the Chinese leaders his strong desire to "turn competition into coordination" with China.
In this sense, joint efforts involving the Belt and Road Initiative routes will provide a new platform for the two countries to deepen mutually beneficial cooperation.
There are two things emblematic of the substantial cooperation along the BRI routes. One is the Asian Infrastructure Investment Bank, and the other is third-party market cooperation. Japan has not joined the AIIB in view of the United States' position and other factors, but has reached consensus on carrying out third-party market cooperation under the framework of the BRI with China.
In December 2017, the Japanese government proposed guidelines for its enterprises on nongovernmental cooperation between Japan and China in the third-party market through financial support in areas such as energy conservation, industrial upgrading and logistics.
In May last year, Premier Li Keqiang visited Japan, and the two governments signed a memorandum of understanding on cooperation between China and Japan in nongovernmental areas in third-party markets and agreed to set up a council for this purpose.
In October last year, Abe visited China, and the two sides jointly held the first China-Japan Third-Party Market Cooperation Forum and signed 52 memorandums of understanding to tap into the huge space of cooperation and profits.
The BRI partner countries are faced with the challenges of eliminating poverty, dealing with public hazards and protecting the environment.
My research center has analyzed the potential of energy conservation and environmental improvement in them and has some findings.
If both the energy consumption per unit of gross domestic product and carbon dioxide emissions per unit of GDP in Southeast Asia, South Asia, Central Asia, the Middle East and countries of the former Soviet Union, other than Central and Eastern Europe, reach the current annual levels of those of Japan, then the annual energy consumption and carbon dioxide emissions can be reduced by about 60 to 70 percent. In particular, India and Russia have very low energy efficiency, with the maximum potential to reduce emissions at around 75 percent.
Japan has the technological edge, while China boasts a market advantage. The two countries are complementary to each other in terms of capital, technology, labor and engineering, procurement and construction.
China is rapidly catching up on many technologies, and even surpassing Japan in some fields. Their cooperation will not only benefit them, but also the third-party countries, a step forward toward the United Nations' Sustainable Development Goals.
At present, boosting third-party market cooperation remains a common challenge for China and Japan. So two things are suggested.
First, political mutual trust is a must.
Chinese philosopher Confucius said, "If those who are near get pleased, those who are far away will be attracted to come."
China-Japan relations have returned to the normal track through the joint efforts of the two sides. A stable relationship not to be influenced by any third party is in the long-term interests of both countries and the rest of the world.
Second, a mutually complementary and win-win system for third-party market cooperation is needed.
The BRI partner countries are faced with three major problems of developing economies, overcoming public hazards and protecting the planet.
According to the World Bank, Russia's average power generation-efficiency in 2016 was 27.5 percent, compared with Japan's 47.7 percent. If China and Japan can work hand in hand to improve it in Russia, all three countries will gain a lot of economic and social benefits.
An approach of market principles plus benefit-sharing plus risk-sharing has been put forth. This means the selection and promotion of projects, apart from policy support, should consider the needs of third parties and market principles with a risk-sharing mechanism. Meanwhile, technology transfer or development costs are borne by all three parties.
At the same time, economic benefits are distributed according to market principles, and environmental benefits are distributed according to each party's contribution.
International and inter-regional cooperation is crucial, given the limitations of self-help efforts by developing countries and the scope and extent of global environmental issues.
So based on the status quo of developing countries along the BRI routes, China and Japan can promote effective environmental cooperation through third-party market cooperation, such as technology development and transfer, and support for the development of environmentally friendly industries in developing countries.
The author is a professor at the College of Policy Science at Ritsumeikan University and secretary-general of the Belt and Road Initiative Japan Research Center. The views do not necessarily reflect those of China Daily.
State Council executive meeting chaired by Li says consumption will be buoyed
China will take more measures, including improving services for people's daily lives and encouraging cultural and tourism consumption, as part of efforts to better meet the need for consumer sector upgrades to further unleash the potential of domestic demand.
The decision was made on Wednesday at the State Council executive meeting chaired by Premier Li Keqiang.
"Government departments should enhance guidance and policy support, work out more ways to spur business activities and provide greater convenience to consumers," Li said.
It was noted at the meeting that, in response to the trends in commercial transformation and consumer upgrades, the use of technologies such as big data will be encouraged, and individualized spending on goods and services, smart consumption and other new business models will be boosted. Traditional shopping malls and aging factory buildings can be converted into new types of consumer facilities for multiple, comprehensive purposes. Pedestrian shopping areas can be renovated in accordance with local conditions.
Reforms to streamline administration, enhance compliance oversight and deliver better services will be deepened. Local governments will be supported in carrying out the testing of registrations requiring one license and multiple venues for business brands. The power to approve qualifications for retail sales of refined oil will be delegated to municipal-level governments.
Regions where conditions are ripe will be encouraged to include community education, eldercare, medical care and household services in the renovation of old residential communities. Such efforts to create clusters of services that make life more convenient for people will receive fiscal support.
E-commerce will be introduced to more rural areas and weak links in cold chain logistics for farm products will be strengthened at a faster pace.
It was agreed to take measures to stimulate consumption in culture and tourism. Policies will be formulated and implemented for ticket price cuts or exemptions at tourist attractions, free admission during offseasons and ticket discounts for performances.
"Tourism consumption is a growth driver with big potential, particularly in boosting consumption and improving people's livelihoods," Li said.
At the same time, market oversight will be strengthened. Market players and individuals who are blacklisted may be punished by multiple agencies. Such efforts will help protect the rights and interests of consumers.
"Cultural consumption deserves our careful study. It should receive as much attention as the consumption of goods and tourism because it contributes to improving people's livelihoods and countering downward pressure on the economy," Li said.
XT-60コネクタ付き8A SBEC付きZTW Gecko 65A ESC
ZTW Gecko 65A ESC（8A SBEC、XT-60コネクタ付き） - ZTW4065201
このZTW GeckoシリーズESCは、高性能で効率的なブラシレス電子スピードコントロールで、スイッチモードBECを内蔵しています。これは、あなたの体重を節約し、あなたの電子接続を簡素化するサーボとレシーバに電力を供給するために別のレシーババッテリを必要とせずに動作することができます。 Geckoシリーズには、軽量でより効率的に熱を放散するのに役立つアルミニウムのヒートシンク本体が含まれています。 GeckoのBECは、不要なシャットダウンの可能性を排除するために、高電流アプリケーションをサポートするように特別に設計されています。また、大規模飛行機やCCPM搭載の大型3Dヘリコプターで一般的に見られる同時複数サーボ操作もサポートできます。競争力のある価格でフル機能のESCを探しているなら、ZTW Geckoは理にかなった選択肢です。
特徴：
温度、電圧、電流、RPMなどのデータロギングシステム
SBEC電圧出力5.0,6.0,7.4および8.4V
高度なガバナーモードとソフトスタート
大電流アプリケーションに対応するように設計された高SBEC電流出力、連続8Aおよびバースト16A
パワーアーム保護、過熱保護、低電圧保護およびロス信号保護
LCDプログラムカードまたはPCによるセカンダリサブメニュー設定
超滑らかで正確なスロットルリニアリティ
高回転モーターを含むほとんどのモーターのサポート
プログラム可能なモータタイミング
重量を最小限に抑えるための新しい小型MOSFET技術を活用
アルミフィン付きヒートシンク
プログラム可能なスロットル入力範囲
アンチスパーク回路（HV OPTOモデルのみ）
ESCファームウェアとプログラム設定は、PC接続（USBアダプタは別売）を使用して更新できます。
以下が含まれます：
8A SBEC付きZTW 65A ESC
お客様の便宜のために、XT-60コネクタ（電源コネクタ）と3.5mmバルブ（モータコネクタ）がプリインストールされています。
取扱説明書
オプション：
ZTW LCDプログラミングカード -
WiFiプログラミングモジュール -
■
TW Gecko 125A ESC with 8A SBEC
ZTW Gecko 125A ESC（8A SBEC-ZTW4125201）
このZTW GeckoシリーズESCは、高性能で効率的なブラシレス電子スピードコントロールで、スイッチモードBECを内蔵しています。これは、あなたの体重を節約し、あなたの電子接続を簡素化するサーボとレシーバに電力を供給するために別のレシーババッテリを必要とせずに動作することができます。 Geckoシリーズには、軽量でより効率的に熱を放散するのに役立つアルミニウムのヒートシンク本体が含まれています。 GeckoのBECは、不要なシャットダウンの可能性を排除するために、高電流アプリケーションをサポートするように特別に設計されています。また、大規模飛行機やCCPM搭載の大型3Dヘリコプターで一般的に見られる同時複数サーボ操作もサポートできます。競争力のある価格でフル機能のESCを探しているなら、ZTW Geckoは理にかなった選択肢です。
特徴：
温度、電圧、電流、RPMなどのデータロギングシステム
SBEC電圧出力5.0,6.0,7.4および8.4V
高度なガバナーモードとソフトスタート
大電流アプリケーションに対応するように設計された高SBEC電流出力、連続8Aおよびバースト16A
パワーアーム保護、過熱保護、低電圧保護およびロス信号保護
LCDプログラムカードまたはPCによるセカンダリサブメニュー設定
超滑らかで正確なスロットルリニアリティ
高回転モーターを含むほとんどのモーターのサポート
プログラム可能なモータタイミング
重量を最小限に抑えるための新しい小型MOSFET技術を活用
アルミフィン付きヒートシンク
プログラム可能なスロットル入力範囲
アンチスパーク回路（HV OPTOモデルのみ）
ESCファームウェアとプログラム設定は、PC接続（USBアダプタは別売）を使用して更新できます。
以下が含まれます：
ZTW Gecko 125A ESC with 8A SBEC
お客様の便宜のために、EC5コネクタ（電源コネクタ）と5.5mmバルブ（モータコネクタ）がプリインストールされています。
取扱説明書
オプション：
ZTW LCDプログラミングカード - 詳細 http://www.ztwshop.com
WiFiプログラミングモジュール - 詳細
RC Brushless ESC,RC ESC,Shenzhen ZTW Model Science&Technology Co.,Ltd
